1800scaleswebsitelogo
Tedea Huntleigh 1042 Load Cell 10 kg

Tedea Huntleigh 1042 Load Cell 10 kg

$190.00
Tedea Huntleigh 1042 10kg Single Point Load Cell Mounting screws are 1/4-20 UNC(coarse) with 3/4" spacing on both top and bottom. These Tedea cells have unique humidity resistant protective coating assuring long term stability. 2 mv/v 10' six conductor cable. NTEP 96-132
40683
Qty:
Share on Facebook

Tedea Huntleigh 1042 Single Point 10 kg Load Cells feature mounting screws 1/4-20 UNC (coarse) with 3/4" spacing on both top and bottom. These cells have a unique humidity resistant protective coating that assures long term stability even under harsh environment and extreme temperatures. 2 mv/v, 0.02% total error, 10'cable, 350 ohm, anodized aluminum. NTEP 96-132.

Tedea 1042 100 kg load cell
1042 specifications (pdf file)

Model 1042 is a low profile two-beam single point load cell designed for direct mounting of low cost weighing platforms, ideally suited for retail, bench and counting scales

 

 

P/N .......... DESCRIPTION
40680     Load Cell, SPT 1042-1kg 10ft TH 2mV/V 350 OHM NTEP III 5 S FM Al Class I
40681     Load Cell, SPT 1042-3kg 10ft TH 2mV/V 350 OHM NTEP III 5 S FM Al Class I
40682     Load Cell, SPT 1042-5kg 10ft TH 2mV/V 350 OHM NTEP III 5 S FM Al Potted Class I
40683     Load Cell, SPT 1042-10kg 10ft TH 2mV/V 350 OHM NTEP III 5 S FM Al Class I
40684     Load Cell, SPT 1042-15kg 10ft TH 2mV/V 350 OHM NTEP III 5 S FM Al Class I
40685     Load Cell, SPT 1042-20kg 10ft TH 2mV/V 350 OHM NTEP III 5 S FM Al Class I
40686     Load Cell, SPT 1042-30kg 10ft TH 2mV/V 350 OHM NTEP III 5 S FM Al Class I
40687     Load Cell, SPT 1042-50kg 10ft TH 2mV/V 350 OHM NTEP III 5 S FM Al Class I
40688     Load Cell, SPT 1042-75kg 10ft TH 2mV/V 350 OHM NTEP III 5 S FM Al Class I
40689     Load Cell, SPT 1042-100kg 10ft TH 2mV/V 350 OHM NTEP III 5 S FM Al Class I

No rating yet... Be the first to rate this product!