|
NCI
7885 Scale Features & Benefits
Remote
Display Six-digit LCD display housed in an extruded enclosure
with a 7 foot cable, connected via RJ 45 connector on the
rear of the scale.
Display
Controls
ZERO:Includes
Auto Zero Tracking or Manual push button to re-establish zero
reference.
TEST:
Runs a diagnostic test to ensure scales is fully functional,
and allows a real-time view of internal settings. Construction
Stainless steel weight platter, powder painted 7 gauge steel
weigh bridge and base plate. Field Calibration Alternate span
points can simplify field calibration by using less than full
capacity weights. Can be set-up as either decimal pound or
kilogram.
RS-232
cable Included with each scale, DB 9-pin, null modem, female
connector allows you to connect to a PC. Emulation Protocols
Standard NCI default with field configurable settings of 8213,
3835, SMA, and Auto Weight Send. This allows you to select
compatible scale communication settings or scale drivers during
field installation when interfacing with shipping software
programs or host devices.
Specifications
Capacity (lb) Capacity (kg)
150 x 0.05 lb 60 x 0.02 kg*
Internal
Resolution: 1 part in 120,000.
Dimensions:
18.0” x 18.0” x 3.0” (457mm x 457mm x 76mm).
Power:120 VAC (+10% -15%), 60 Hz, standard 3-wire ground.
Operating
Environment
Temperature: 42° F to 104° F (5° C to 40°
C)
Relative
Humidity: 10 to 95% (non-condensing)
Agency
Approvals:
United States: NTEP approved for use in Class III operations
Canada: Canada Weights and Measures approval pending.
Input/Output:
RS-232, bi-directional, configurable 1200 - 19.2K baud. Transmits
weight and scale status whenever ASCII “W” is sent
by a remote device.
Shipping
Weight: 47 lbs/22 kg, standard configuration.
|
Buy
American Made Scales
