|
The
NCI 7840 bench scale with 18" x 24" Ball Top Platter easily
accommodates oversize parcels or containers in the shipping room. The
model 9503-15793 has a fast digital response and large weigh platter.
This NTEP approved scale is also features a 250 pound capacity.
Features &
Benefits
Fast Digital Response – Speeds processing time that results in improved
throughput and increased productivity.
Simple to Use –
Reduces operator training time.
DuraBridge®
Technology – Reduces overall scale deflection when a full load is applied.
Resident Display
– Front mounted, 1/2" H, six-digit LCD display.
Large Weigh Platters
– Easily accommodates oversize parcels or containers.
Versatile – Can
be set up in either decimal pounds or kilogram mode.
Construction – Stainless
steel weigh platter. Painted mild steel base enclosure.
RS-232 Cable – DB-9
pin female connector allows you to connect to a PC.
Controls – ZERO:
With auto zero tracking for zeroing the scale. TEST: Runs a diagnostic
program to assure scale is fully functional.
I/O Port – Allows
for connection to a computer or smart terminal. Uses standard PC cable
to 9-pin "D" connector on scale. RS-232, bidirectional, configurable
1200 - 19.2K baud. Transmits weight and scale status whenever ASCII
“W” <CR> is sent by a remote device. High resolution “H” command
accesses increased resolution.
Power Supply – Recessed
power supply with standard wall plug.
Specifications
Capacity and Resolution:
250 lb x .05 lb or 100 kg x .02 kg
Weight classifier
or scale configurations available in setup.
Shipping Weight:
76 lb (With Ball-Top)
Platter Size: 18”
x 24”
Power: 120 VAC (+10%-15%),
60 Hz, standard 3-wire ground.
Agency Approvals:
United States: NTEP #95-121
Canada: MOI #AM-5099 Rev. 1 For use as a Class III Device from +5°C
through 40°C
Operating Environment:
42°F to 104°F (5°C to 40°C), 10% to 95%, RH (non-condensing)
|
