1800scaleswebsitelogo

Scale Hardware

This page consists of a nice selection of various hardware and parts to be used on scales or with scales. Some items listed on this page include an adjustable load cell foot, junction boxes with summing boards, home run cables and more.

  • T-Strip Molding for Truck Scales 10 foot
    T-Strip Rubber Molding 70'Pit T-Strip Extruded Rubber Molding standard features include designed for use in truck scale applications to prevent spill-over into the pit -- Impact, tear, and weather-resistant SBR rubber. 70' length piece. Price includes ground shipping (cont'l US) on a pallet to business address with forklift or loading dock.
    $805.00
    Qty:
  • Transcell Technology TI-500E Digital Weight Indicator
    Transcell TI-500E Digital Weight IndicatorThe Transcell TI-500E is a general purpose, "no frills" digital indicator housed in a standard ABS enclosure. It comes with a large (0.6") green LED screen for easy read out of up to 50,000 display divisions, and supplies enough current for up to four 350-ohm load cells. All setup parameters may be easily entered via the front panel keys. Great replacement digital readout for an old scale.
    $295.00$225.00
    Qty:
  • Transcell TI500 Interface Cable
    Transcell TI500 Home Run CableInterface Cable (Home Run Cable) - 15' long with a 14 pin connector. 4 wire with braided shielding. 0.2" diameter cable, 24AWG stranded wire. Works with Transcell TI500E digital indicator.
    $50.00
    Qty:
  • Isobar Surge Suppressor Tripp Lite ISOBAR4ULTRA
    Tripp-Lite Isobar Surge SuppressorTripp Lite's ISOBAR is the world's number one selling premium suppressor series with more than 14 million satisfied customers and a safety-tested history of 20+ years. 4 outlets arranged in two filter banks prevent system crashes, reboots and performance problems common as noisy peripherals are powered off and on. Widely spaced outlets accommodate up to 2 large transformer plugs without blocking outlets.
    $145.00
    Qty:
  • Isobar Surge Suppressor Tripp Lite ISOBAR4ULTRA
    Tripp-Lite IsoBlok AC Transient ProtectorTripp-Lite Isoblok AC Transient Protector offers two direct plug-in outlets and two LED indicators for power and protection circuitry. The Isoblok AC should be used on lines where spikes, noise and interference occur. Features 2 outlets, direct plug-in, LED indicator for power on, LED indicator for protection circuitry, UL1449 listed at 330 volts, mounting clamp assures positive connection
    $125.00
    Qty:
  • Rice Lake JB4SS Stainless Steel Junction BoxRice Lake J-Box, JB4SS 4 Channel Signal Trim with Expansion, w/PG 7 cord grips for load cells, Stainless Steel NEMA 4X
    $275.00
    Qty:
  • Stainless Steel Junction Box For Scale Load Cell Summing
    Junction Box Stainless Steel w/ (4) loadcell Summing boardStainless Steel junction box with 4 cell summing card. Use with (2) to (4) loadcell systems -- Floor, tank, hopper, or livestock applications. Has 4 cable fittings (openings) for loadcells and 1 opening for the "homerun" cable.
    $195.00
    Qty:
  • Junction Box ABS Plastic w/ (4) loadcell Summing boardABS plastic junction box with 4 cell summing card. Overall j-box dimensions are approx: 6.75" x 4.5" x 1.28". Use with (2) to (4) loadcell systems -- Floor, tank, hopper, or livestock applications. Has 4 cable fittings (openings) for loadcells and 1 opening for the "homerun" cable.
    $99.00
    Qty:
  • Stainless Steel Junction Box For Scales 6 Load Cell Summing Card SS-65AS-SP
    Junction Box Stainless Steel w/ (6) LoadCell Summing Board, SS-65AS-SPNEMA 4X Stainless Steel Summing box complete with 6 cell card. (SIGNAL Trim) w/ Surge Protection. Has (8) compression fittings total. Expandable
    $435.00
    Qty:
  • 8 Load Cell Stainless Steel Junction Box for Scales SS-85AS-SP
    Junction Box Stainless Steel w/ (8) LoadCell Summing Board, SS-85AS-SPSS-85AS-SP Stainless Steel junction box with 8 cell summing card. (SIGNAL Trim) with Surge Protection.
    $480.00
    Qty:
  • Surefoot Floor Scale Replacement FootSurefoot Replacement foot, adapts to most floor scales. Use with single-ended beams to provide large, flat, adjustable introduction surface. Special neoprene rubber sandwich base gives high accuracy, linearity and repeatability 1/2-20 UNF (SST). Diameter: 3.47 in.
    $50.00
    Qty:
  • SST Captured Ball Leveling Foot 1/2-20 UNFStainless steel captured ball replacement leveling foot with 1/2-20 UNF threads. Adapts to most floor scales. Use with single-ended beams to provide large, flat, adjustable introduction surface. Foot diameter is 3 inches.
    $80.00
    Qty:
  • SST Captured Ball Leveling Foot 3/4-20 UNFStainless steel captured ball replacement leveling foot with 3/4-16 UNF threads. Typically used with 5000 lb. large envelope single-ended beam load cell to provide large, flat, adjustable introduction surface. Foot diameter is 3 inches.
    $113.00
    Qty:
  • Rubber Leveling Foot 1/2-20 UNFPolyurethane Rubber Leveling Feet all with 1/2-20 UNF SS stud. 3 inch foot diameter
    $32.00
    Qty:
  • Carbon Steel Captured Ball Leveling Foot 1/2-20 UNFCarbon steel captured ball replacement leveling foot with 1/2-20 UNF threads. Adapts to most floor scales. Use with single-ended beams to provide large, flat, adjustable introduction surface. Foot diameter is 3 inches.
    $45.00
    Qty:
  • Carbon Steel Captured Ball Leveling Foot 3/4-16 UNFCarbon steel captured ball replacement leveling foot with 3/4-16 UNF threads. Typically used with 5000 lb. large envelope single-ended beam load cell to provide large, flat, adjustable introduction surface. Foot diameter is 3 inches.
    $56.00
    Qty:
  • Swivel Load Cell Foot 1/2-20 UNFIf you own a floor scale it is usually a good idea to have a few of these on hand, just in case. Affordable high quality swivel beam foot. Measures about 3 1/2 inches from bottom of the rubber pad to the top of the threaded rod. Alloy steel swivel ball bearing foot has non-slip 2 3/8" rubber base and 1/2-20 UNF threads. Great replacement foot for a floor scale or any other item that you need a 1/2-20 load cell foot.
    $28.00
    Qty:
  • SBWP Weigh Bar Cable 4-Conductor, 20 AWG, 250 footThis item 17960-1000 is 250 feet of 4-conductor load cell cable, 20 AWG
    $315.00
    Qty:
  • Protect Your Floor Scale From Being Hit By Forklifts
    4 Foot Long Painted Steel Floor Scale Bumper GuardAdd a bumper guard to any side of your floor scale that is exposed to traffic like forklifts. These bumper guards are made out of mild steel and painted safety yellow, so they will be easy to see in almost any environment. Installation is easy. A little money and effort now can save you big money down the road. Length is 4 foot.
    $145.00
    Qty:
  • Protect Your Floor Scale From Being Hit By Forklifts
    5 Foot Long Painted Steel Floor Scale Bumper GuardAdd a bumper guard to any side of your 5x5 floor scale that is exposed to traffic like forklifts. These bumper guards are made out of mild steel and painted safety yellow, so they will be easy to see in almost any environment. Installation is easy, just position the bumper guard beside the scale platform (you don't want to be touching the scale as this could cause errors in the weight readings). Mark the spots on your floor where you will need to drill holes. Purchase a few 1/2 inch anchor bolts. Drill the holes, add the anchor bolts and you're all set. A little money and effort now can save you big money down the road. Length is 5 foot.
    $180.00
    Qty:
  • 1800scales Quick Disconnect CableGreat quick disconnect cable for use with Stainless Steel Indicators that need to be removed from the scale base. A one foot pig-tail and 17 feet on the other side of the 5 pin metal connector. Approximately 18 feet of cable in total.
    $60.00
    Qty:
  • Floor Scale Anchor Plate for 3" Dia FootMounting plate for floor scale foot to sit inside to help prevent the scale from moving. Inside hole diameter is approximately 3.15" to accommodate a 3" foot. Works best with at least two installed. Use anchors to install (not included). Painted steel.
    $30.00
    Qty:
Share on Facebook